- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高电流值小电流值做实验的时候仪(耐焊弧做实验的时候仪)-(测算机保持)
High voltage low current tester (arc resistance tester) - (computer control)
企业产产品名字:耐电弧试验机
Product name: electric arc resistance tester
食品型号查询:NDH-A
Product model: NDH - A
满足了标准规范:GB/T 1411-2002《固态垃圾电绝缘涂料耐高降低电流量脉冲蓄电池放电的试验装置》(就是指IEC 61621-1997)及ASTM D495等条件的耍求设定生产加工的,并满足IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
最主要符合标准及作用:
本可靠性试验仪是依照规定使适用无刷电机、设备落球回弹试验仪,介电击穿强度测定仪和水取暖器设备落球回弹试验仪,介电击穿强度测定仪等行业中的技工用塑、硅胶粘合剂胶和隔热电阻性漆等隔热电阻性板材的耐弧光性能参数方面认定,主适用固态隔热电阻性板材如:塑、保护膜、硅胶粘合剂、白云母、陶瓷图片、窗户玻璃、隔热电阻性油、隔热电阻性漆、硬纸板等材质的耐弧光性能参数方面测试仪;
本實驗设计机由求算机把握加载,也可以信息显示如今實驗工作状态及實驗日子,實驗完结后并储存如今實驗的数据,并可复印机.的标准调查意见书。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 远程服务器为上上下下合一组成部分,下端为操作步骤系统的,上侧为经过多次实验发现箱。
2 本食品用*新智能化操作技术性,使用使用过程(IEC或ASTM)可自主实施校正,并在PC上彰显实验设计的过程 和的结果。
3 **功能保持良好,抗干扰信号性能强,测验精准性高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧放电通断耗时确定误差:不低于 ±10ms
2 调压器功率:2kVA
3 額定试验装置工作电压:12.5kV
4 耐压的电压可靠性强,精密度:±3%
5 感应电流把握精确:±10% 电流大小预估准确度:1.5%
6 探针对岩样经济压力:(0.5±0.05)N
7 电极涂料涂料:钨棒
8 参比电极的距离:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 便用生态温差:(23±2)℃
10 利用生态环境绝对湿度:(50±5)%
11 电压:220V±5% 50Hz
12 疲劳试验 的方式: 国家标准下载/美标/10 mA 连续不断/20 mA 维持/30 mA连续不断/40 mA陆续
13 耐压试验软件程序方式:
| 执行程序段 | 焊弧电流大小 mA | 电弧焊接通断时长s | 各过程段持续间隔时间间隔s | 试验台总周期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 接连通 | 60 | 240 | |
| 5 | 20 | 接连通 | 60 | 300 | |
| 6 | 30 | 连继通 | 60 | 360 | |
| 7 | 40 | 间隔通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序号顺序 | 种类 | 需求量 | 备注栏 |
| 01 | 耐电弧焊接自测仪 | 几台 | |
| 02 | 电级模式 | 一项 | |
| 03 | 工业支承 | 一款 | |
| 04 | 电压低压电缆 | 做一套 | |
| 05 | 接地装置放** | 每支 | |
| 06 | 直流电压毫安表 | 这台 | |
| 07 | 台式机测控免费软件 | 一台 | |
| 08 | 试件材料架 | 一部 | |
| 09 | 参比电极多远规格块 | 2块 | |
| 10 | 的视角准则块 | 2块 | |
| 11 | 工业陶瓷片 | 2片 | |
| 12 | 喷墨打印图片机 | 1台 | 高端品牌 |
| 13 | 算机 | 1台 | 公司 |
| 14 | 食用说书 | 1份 | |
| 15 | 合适证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 产品的应用:
NDH-A 耐电弧焊接应力测试仪-微机抑制
NDH-B 耐焊弧实验仪-触控屏管控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!